ROTO 180

  • Battery-powered
  • Specific plates for insulated and corrugated panels
  • 180° rotation system (up / down) with the help of the hydraulic cylinder
  • Dual vacuum circuit EN13155
  • Wireless radio remote control

ROTO180 is a vacuum lifter specifically designed for flipping over insulated panels by 180° and subsequently installing them.

Power supply

This model is powered by rechargeable batteries that can be easily removed and interchanged with the second battery kit provided if needed. The vacuum lifter comes with the included battery charger.

Movements

Suction and release of the load is managed remotely by wireless radio control. Alternatively, wired management via wired hand control is available.
From the radio control/pushbutton panel, it is also possible to manage the 180° tilting of the lifter, which is operated by a powerful hydraulic cylinder. In addition to flipping insulated roofing panels, ROTO180 can be used for their subsequent installation.

Frame

ROTO180 is equipped with 4 suction pads for a maximum lifting capacity of 360 kg. The suction pads are suitable for lifting and laying smooth, micro-ribbed or corrugated insulated panels. ROTO180 features a distinctive “C” structure that ensures proper load balancing during any handling.

The lifter can be used in below-the-hook mode or with the use of forks.

In case of faux-roof tile insulated panels, we have suction pads specifically for that use.

Safety

ROTO180 ensures compliance with the highest safety standards to protect workers and load.
Thanks to the dual vacuum circuit, the cladding lifter can be used on construction sites in maximum safety and in full compliance with EN13155. In addition, the vacuum control unit constantly monitors the vacuum level in the circuit and warns the operator of any dangers with audiovisual alarms. Each time it is turned on, the control unit performs a self-diagnosis to ensure the proper functioning of all components.

Transport

The vacuum lifter is supplied with a handy stand for storage and transport.
The frame of the lifter, which can be disassembled into several parts, goes to make up the transport stand itself. In this way, the footprint of the suction lifter during transport and storage is minimized (size of a pallet).

Case history


First exhibition at Dach-Holz in Stuttgart

News

First exhibition at Dach-Holz in Stuttgart

Righetti exhibits its cladding vacuum lifters for sandwich panels at Dach-Holz trade fair from March 5th to 8th

Read more
Movimentazione dei pannelli sandwich da copertura con sollevatore a ventosa dotato di basculamento idraulico 180°

Insights

ROTO180 to Flip Over Sandwich Panel Handling

Righetti designed a vacuum lifter to flip over stacked roof sandwich panels

Read more
Wall panels installation using cladding vacuum lifter

Insights

The importance of removable batteries

Working on construction site using a vacuum lifter is easier and more efficient thanks to removable and rechargeable batteries.

Read more
 

You might also be interested


Cladding vacuum lifter up to 250kg

CL1-4

  • Vacuum Lifter for lifting and installation of wall and roof panels
  • Lifting capacity 250 kg
  • Battery operating system
  • Modular frame
See
Noleggio di sollevatore a ventosa per pannelli in poliuretano e lana di rocccia

CL1-6

  • Lifting capacity 400 kg
  • Battery operating system
  • Modular frame
  • Vacuum Lifter for lifting and installation of wall and roof panels
See
Noleggio ventosa compatta per pannelli coibentati da parete

CL-W

  • Installation of wall panels
  • Lifting capacity 375 kg
  • Battery operating system
  • 0-90° tilt system
  • 0-90° rotation
See
Vacuum lifter for roof sandwich panels

CLF4

  • Lifting capacity 350 kg
  • Battery operating system
  • Horizontally fixed frame
  • Vacuum lifter for sandwich roof panels
See
Do you need any help?

Do you need any help?

Let us know your needs and we will guide you in the right direction.
Visit our page, select and fill in the information according to your requests.

Get your Vacuum Lifter