CLF4

Vacuum lifter CLF4 is the perfect solution for installation of sandwich roof panels. Thanks to its horizontally fixed frame, it allows the handling of the load only horizontally.

Power supply

CLF4 is powered by rechargeable batteries that, if necessary, can be easily removed and exchanged. Vacuum lifter is provided with battery charger included.

Movements

Load suction and release are controlled through a practical manual valve located on the handle. Vacuum lifter frame is horizontally fixed: this feature makes it perfect for sandwich roof panels where no tilt is required.

Frame

Vacuum lifter CLF4 is equipped with 4 suction pads, resulting in a maximum lifting capacity of 350kg. The suction pads are specific for lifting and handling smooth, micro-ribbed and corrugated sandwich panels. In case of special panels, such as wavy and roof-tile effect panels, it is possible to interchange standard suction pads with spefic ones.
Its central beam can be 2000mm, 3000mm or 4000mm long.

Safety

CLF4 respects the highest safety standards to protect workers and the load. Thanks to a dual vacuum circuit, it can be used on construction site in full respect of European laws EN13155.  Moreover, the vacuum control unit constantly monitors the level of vacuum in the circuit, signalling any possible dangers.