![First exhibition at Dach-Holz in Stuttgart](https://www.righettivacuumlifters.com/wp-content/uploads/2024/03/800x600_stand-Dach-Holz.jpg)
News
First exhibition at Dach-Holz in Stuttgart
Righetti exhibits its cladding vacuum lifters for sandwich panels at Dach-Holz trade fair from March 5th to 8th
Read moreProduct: CL1-4
CL1-4 is a cladding vacuum lifter specifically designed for the installation of insulated wall or roof panels up to 250kg. The special feature of the CL1-4 is the possibility of different configurations. With the same lifter it is possible to install both roof and wall panels, vertically and horizontally.
CL1-4 is powered by rechargeable batteries that can be easily removed and replaced if necessary. The vacuum lifter comes with battery charger included.
Suction and release of the load is controlled by the dual control valve on the handlebar of the lift. As an option, it is also possible to request a radio-controlled version.
The tilting mechanism allows the panels to be moved safely and smoothly from horizontal to vertical and vice versa.
CL1-4 has 4 suction pads and a maximum load capacity of 250 kg.
The suction cups are suitable for lifting and installing flat, micro-ribbed or corrugated panels.
The design of the vacuum lifter is modular to suit both short and longer sandwich panels. The vacuum lifter can be extended by adding extensions that can be quickly attached to the structure thanks to quick couplings. In the case of roofing tile panels, we have suction pads specifically for that use.
CL1-4 meets the highest safety standards to protect workers and the load.
Thanks to the dual vacuum circuit, it can be used on construction sites safely and in full compliance with EN13155.
In addition, the vacuum control unit constantly monitors the vacuum level in the circuit and warns the operator of any dangers with audio-visual alarms. Each time it is switched on, the control unit carries out a self-diagnosis to ensure the proper functioning of all components.
The lifter is supplied with a practical parking stand for storage and transport.
The structure of the vacuum lifter, which can be dismantled into several parts, forms the frame of the transport stand. In this way, the space required for transport and storage is reduced to a minimum (size of a pallet).
Find below a short technical video of the lift: to view the video on site, press the “Play” icon next to the photo of the lift.
Righetti exhibits its cladding vacuum lifters for sandwich panels at Dach-Holz trade fair from March 5th to 8th
Read more
For installing wall sandwich panels with wavy finish, our R&D Department has developed ad hoc vacuum lifters.
Read more
Handling mineral wool sandwich panels by using a vacuum lifter may cause concerns, but here’s why you shouldn’t have any.
Read more
Working on construction site using a vacuum lifter is easier and more efficient thanks to removable and rechargeable batteries.
Read more
Insulated sheets or panel roof tile shaped are very used in residential constructions.
Read more
Righetti exhibits its cladding vacuum lifters for sandwich panels at Dach-Holz trade fair from March 5th to 8th
Read more
For installing wall sandwich panels with wavy finish, our R&D Department has developed ad hoc vacuum lifters.
Read more
Handling mineral wool sandwich panels by using a vacuum lifter may cause concerns, but here’s why you shouldn’t have any.
Read more
Working on construction site using a vacuum lifter is easier and more efficient thanks to removable and rechargeable batteries.
Read more
Insulated sheets or panel roof tile shaped are very used in residential constructions.
Read more
Let us know your needs and we will guide you in the right direction.
Visit our page, select and fill in the information according to your requests.